#! /bin/sh

# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13 
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.

# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
#
# The following version number definitions apply to GLib and GModule
# as a whole, so if changes occoured in either of them, they are both
# treated with the same interface and binary age.
#
# Making releases:
#   GLIB_MICRO_VERSION += 1;
#   GLIB_INTERFACE_AGE += 1;
#   GLIB_BINARY_AGE += 1;
# if any functions have been added, set GLIB_INTERFACE_AGE to 0.
# if backwards compatibility has been broken,
# set GLIB_BINARY_AGE and GLIB_INTERFACE_AGE to 0.
#
GLIB_MAJOR_VERSION=1
GLIB_MINOR_VERSION=3
GLIB_MICRO_VERSION=0
GLIB_INTERFACE_AGE=0
GLIB_BINARY_AGE=0
GLIB_VERSION=$GLIB_MAJOR_VERSION.$GLIB_MINOR_VERSION.$GLIB_MICRO_VERSION
ac_help="$ac_help
  --enable-shared[=PKGS]  build shared libraries [default=yes]"
ac_help="$ac_help
  --enable-static[=PKGS]  build static libraries [default=yes]"
ac_help="$ac_help
  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
ac_help="$ac_help
  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
  --disable-libtool-lock  avoid locking (might break parallel builds)"
ac_help="$ac_help
  --enable-maintainer-mode enable make rules and dependencies not useful
                          (and sometimes confusing) to the casual installer"
if test `expr $GLIB_MINOR_VERSION \% 2` = 1 ; then
	debug_default=yes
else
	debug_default=minimum
fi
ac_help="$ac_help
  --enable-debug=[no/minimum/yes] turn on debugging [default=$debug_default]"
ac_help="$ac_help
  --enable-mem-check      turn on malloc/free sanity checking [default=no]"
ac_help="$ac_help
  --enable-mem-profile    turn on malloc profiling atexit [default=no]"
ac_help="$ac_help
  --enable-ansi           turn on strict ansi [default=no]"
ac_help="$ac_help
  --enable-threads        turn on basic thread support [default=yes]
                          ([=no] will override --with-threads)"
ac_help="$ac_help
  --with-threads=[none/posix/dce/solaris/nspr] specify a thread implementation to use"

# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'

# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12

ac_prev=
for ac_option
do

  # If the previous option needs an argument, assign it.
  if test -n "$ac_prev"; then
    eval "$ac_prev=\$ac_option"
    ac_prev=
    continue
  fi

  case "$ac_option" in
  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
  *) ac_optarg= ;;
  esac

  # Accept the important Cygnus configure options, so we can diagnose typos.

  case "$ac_option" in

  -bindir | --bindir | --bindi | --bind | --bin | --bi)
    ac_prev=bindir ;;
  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
    bindir="$ac_optarg" ;;

  -build | --build | --buil | --bui | --bu)
    ac_prev=build ;;
  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
    build="$ac_optarg" ;;

  -cache-file | --cache-file | --cache-fil | --cache-fi \
  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
    ac_prev=cache_file ;;
  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
    cache_file="$ac_optarg" ;;

  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
    ac_prev=datadir ;;
  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
  | --da=*)
    datadir="$ac_optarg" ;;

  -disable-* | --disable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    eval "enable_${ac_feature}=no" ;;

  -enable-* | --enable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "enable_${ac_feature}='$ac_optarg'" ;;

  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
  | --exec | --exe | --ex)
    ac_prev=exec_prefix ;;
  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
  | --exec=* | --exe=* | --ex=*)
    exec_prefix="$ac_optarg" ;;

  -gas | --gas | --ga | --g)
    # Obsolete; use --with-gas.
    with_gas=yes ;;

  -help | --help | --hel | --he)
    # Omit some internal or obsolete options to make the list less imposing.
    # This message is too long to be a string in the A/UX 3.1 sh.
    cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
  --cache-file=FILE       cache test results in FILE
  --help                  print this message
  --no-create             do not create output files
  --quiet, --silent       do not print \`checking...' messages
  --version               print the version of autoconf that created configure
Directory and file names:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [$ac_default_prefix]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [same as prefix]
  --bindir=DIR            user executables in DIR [EPREFIX/bin]
  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
  --datadir=DIR           read-only architecture-independent data in DIR
                          [PREFIX/share]
  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
                          [PREFIX/com]
  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
  --includedir=DIR        C header files in DIR [PREFIX/include]
  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
  --infodir=DIR           info documentation in DIR [PREFIX/info]
  --mandir=DIR            man documentation in DIR [PREFIX/man]
  --srcdir=DIR            find the sources in DIR [configure dir or ..]
  --program-prefix=PREFIX prepend PREFIX to installed program names
  --program-suffix=SUFFIX append SUFFIX to installed program names
  --program-transform-name=PROGRAM
                          run sed PROGRAM on installed program names
EOF
    cat << EOF
Host type:
  --build=BUILD           configure for building on BUILD [BUILD=HOST]
  --host=HOST             configure for HOST [guessed]
  --target=TARGET         configure for TARGET [TARGET=HOST]
Features and packages:
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --x-includes=DIR        X include files are in DIR
  --x-libraries=DIR       X library files are in DIR
EOF
    if test -n "$ac_help"; then
      echo "--enable and --with options recognized:$ac_help"
    fi
    exit 0 ;;

  -host | --host | --hos | --ho)
    ac_prev=host ;;
  -host=* | --host=* | --hos=* | --ho=*)
    host="$ac_optarg" ;;

  -includedir | --includedir | --includedi | --included | --include \
  | --includ | --inclu | --incl | --inc)
    ac_prev=includedir ;;
  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
  | --includ=* | --inclu=* | --incl=* | --inc=*)
    includedir="$ac_optarg" ;;

  -infodir | --infodir | --infodi | --infod | --info | --inf)
    ac_prev=infodir ;;
  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
    infodir="$ac_optarg" ;;

  -libdir | --libdir | --libdi | --libd)
    ac_prev=libdir ;;
  -libdir=* | --libdir=* | --libdi=* | --libd=*)
    libdir="$ac_optarg" ;;

  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
  | --libexe | --libex | --libe)
    ac_prev=libexecdir ;;
  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
  | --libexe=* | --libex=* | --libe=*)
    libexecdir="$ac_optarg" ;;

  -localstatedir | --localstatedir | --localstatedi | --localstated \
  | --localstate | --localstat | --localsta | --localst \
  | --locals | --local | --loca | --loc | --lo)
    ac_prev=localstatedir ;;
  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
    localstatedir="$ac_optarg" ;;

  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
    ac_prev=mandir ;;
  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
    mandir="$ac_optarg" ;;

  -nfp | --nfp | --nf)
    # Obsolete; use --without-fp.
    with_fp=no ;;

  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c)
    no_create=yes ;;

  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
    no_recursion=yes ;;

  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
  | --oldin | --oldi | --old | --ol | --o)
    ac_prev=oldincludedir ;;
  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
    oldincludedir="$ac_optarg" ;;

  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
    ac_prev=prefix ;;
  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
    prefix="$ac_optarg" ;;

  -program-prefix | --program-prefix | --program-prefi | --program-pref \
  | --program-pre | --program-pr | --program-p)
    ac_prev=program_prefix ;;
  -program-prefix=* | --program-prefix=* | --program-prefi=* \
  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
    program_prefix="$ac_optarg" ;;

  -program-suffix | --program-suffix | --program-suffi | --program-suff \
  | --program-suf | --program-su | --program-s)
    ac_prev=program_suffix ;;
  -program-suffix=* | --program-suffix=* | --program-suffi=* \
  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
    program_suffix="$ac_optarg" ;;

  -program-transform-name | --program-transform-name \
  | --program-transform-nam | --program-transform-na \
  | --program-transform-n | --program-transform- \
  | --program-transform | --program-transfor \
  | --program-transfo | --program-transf \
  | --program-trans | --program-tran \
  | --progr-tra | --program-tr | --program-t)
    ac_prev=program_transform_name ;;
  -program-transform-name=* | --program-transform-name=* \
  | --program-transform-nam=* | --program-transform-na=* \
  | --program-transform-n=* | --program-transform-=* \
  | --program-transform=* | --program-transfor=* \
  | --program-transfo=* | --program-transf=* \
  | --program-trans=* | --program-tran=* \
  | --progr-tra=* | --program-tr=* | --program-t=*)
    program_transform_name="$ac_optarg" ;;

  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil)
    silent=yes ;;

  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
    ac_prev=sbindir ;;
  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
  | --sbi=* | --sb=*)
    sbindir="$ac_optarg" ;;

  -sharedstatedir | --sharedstatedir | --sharedstatedi \
  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
  | --sharedst | --shareds | --shared | --share | --shar \
  | --sha | --sh)
    ac_prev=sharedstatedir ;;
  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
  | --sha=* | --sh=*)
    sharedstatedir="$ac_optarg" ;;

  -site | --site | --sit)
    ac_prev=site ;;
  -site=* | --site=* | --sit=*)
    site="$ac_optarg" ;;

  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
    ac_prev=srcdir ;;
  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
    srcdir="$ac_optarg" ;;

  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
  | --syscon | --sysco | --sysc | --sys | --sy)
    ac_prev=sysconfdir ;;
  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
    sysconfdir="$ac_optarg" ;;

  -target | --target | --targe | --targ | --tar | --ta | --t)
    ac_prev=target ;;
  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
    target="$ac_optarg" ;;

  -v | -verbose | --verbose | --verbos | --verbo | --verb)
    verbose=yes ;;

  -version | --version | --versio | --versi | --vers)
    echo "configure generated by autoconf version 2.13"
    exit 0 ;;

  -with-* | --with-*)
    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "with_${ac_package}='$ac_optarg'" ;;

  -without-* | --without-*)
    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    eval "with_${ac_package}=no" ;;

  --x)
    # Obsolete; use --with-x.
    with_x=yes ;;

  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
  | --x-incl | --x-inc | --x-in | --x-i)
    ac_prev=x_includes ;;
  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
    x_includes="$ac_optarg" ;;

  -x-libraries | --x-libraries | --x-librarie | --x-librari \
  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
    ac_prev=x_libraries ;;
  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
    x_libraries="$ac_optarg" ;;

  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
    ;;

  *)
    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
      echo "configure: warning: $ac_option: invalid host type" 1>&2
    fi
    if test "x$nonopt" != xNONE; then
      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
    fi
    nonopt="$ac_option"
    ;;

  esac
done

if test -n "$ac_prev"; then
  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
  exec 6>/dev/null
else
  exec 6>&1
fi
exec 5>./config.log

echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5

# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
  case "$ac_arg" in
  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c) ;;
  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
  esac
done

# NLS nuisances.
# Only set these to C if already set.  These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi

# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h

# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=glist.c

# Find the source files, if location was not specified.
if test -z "$srcdir"; then
  ac_srcdir_defaulted=yes
  # Try the directory containing this script, then its parent.
  ac_prog=$0
  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
  srcdir=$ac_confdir
  if test ! -r $srcdir/$ac_unique_file; then
    srcdir=..
  fi
else
  ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
  if test "$ac_srcdir_defaulted" = yes; then
    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
  else
    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
  fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`

# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
  if test "x$prefix" != xNONE; then
    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
  else
    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
  fi
fi
for ac_site_file in $CONFIG_SITE; do
  if test -r "$ac_site_file"; then
    echo "loading site script $ac_site_file"
    . "$ac_site_file"
  fi
done

if test -r "$cache_file"; then
  echo "loading cache $cache_file"
  . $cache_file
else
  echo "creating cache $cache_file"
  > $cache_file
fi

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

ac_exeext=
ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
    ac_n= ac_c='
' ac_t='	'
  else
    ac_n=-n ac_c= ac_t=
  fi
else
  ac_n= ac_c='\c' ac_t=
fi



# Save this value here, since automake will set cflags later
cflags_set=${CFLAGS+set}

# we rewrite this file
rm -f glibconfig-sysdefs.h








# libtool versioning
LT_RELEASE=$GLIB_MAJOR_VERSION.$GLIB_MINOR_VERSION
LT_CURRENT=`expr $GLIB_MICRO_VERSION - $GLIB_INTERFACE_AGE`
LT_REVISION=$GLIB_INTERFACE_AGE
LT_AGE=`expr $GLIB_BINARY_AGE - $GLIB_INTERFACE_AGE`





VERSION=$GLIB_VERSION
PACKAGE=glib

ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
  if test -f $ac_dir/install-sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install-sh -c"
    break
  elif test -f $ac_dir/install.sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install.sh -c"
    break
  fi
done
if test -z "$ac_aux_dir"; then
  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.

# Find a good install program.  We prefer a C program (faster),
# so one script is as good as another.  But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:633: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
  for ac_dir in $PATH; do
    # Account for people who put trailing slashes in PATH elements.
    case "$ac_dir/" in
    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
    *)
      # OSF1 and SCO ODT 3.0 have their own names for install.
      # Don't use installbsd from OSF since it installs stuff as root
      # by default.
      for ac_prog in ginstall scoinst install; do
        if test -f $ac_dir/$ac_prog; then
	  if test $ac_prog = install &&
            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
	    # AIX install.  It has an incompatible calling convention.
	    :
	  else
	    ac_cv_path_install="$ac_dir/$ac_prog -c"
	    break 2
	  fi
	fi
      done
      ;;
    esac
  done
  IFS="$ac_save_IFS"

fi
  if test "${ac_cv_path_install+set}" = set; then
    INSTALL="$ac_cv_path_install"
  else
    # As a last resort, use the slow shell script.  We don't cache a
    # path for INSTALL within a source directory, because that will
    # break other packages using the cache if that directory is
    # removed, or if the path is relative.
    INSTALL="$ac_install_sh"
  fi
fi
echo "$ac_t""$INSTALL" 1>&6

# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'

test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'

test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'

echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
echo "configure:686: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments.  Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
   if test "$*" = "X"; then
      # -L didn't work.
      set X `ls -t $srcdir/configure conftestfile`
   fi
   if test "$*" != "X $srcdir/configure conftestfile" \
      && test "$*" != "X conftestfile $srcdir/configure"; then

      # If neither matched, then we have a broken ls.  This can happen
      # if, for instance, CONFIG_SHELL is bash and it inherits a
      # broken ls alias from the environment.  This has actually
      # happened.  Such a system could not be considered "sane".
      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
alias in your environment" 1>&2; exit 1; }
   fi

   test "$2" = conftestfile
   )
then
   # Ok.
   :
else
   { echo "configure: error: newly created file is older than distributed files!
Check your system clock" 1>&2; exit 1; }
fi
rm -f conftest*
echo "$ac_t""yes" 1>&6
if test "$program_transform_name" = s,x,x,; then
  program_transform_name=
else
  # Double any \ or $.  echo might interpret backslashes.
  cat <<\EOF_SED > conftestsed
s,\\,\\\\,g; s,\$,$$,g
EOF_SED
  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
  rm -f conftestsed
fi
test "$program_prefix" != NONE &&
  program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"

# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"

echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:743: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftestmake <<\EOF
all:
	@echo 'ac_maketemp="${MAKE}"'
EOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
  eval ac_cv_prog_make_${ac_make}_set=yes
else
  eval ac_cv_prog_make_${ac_make}_set=no
fi
rm -f conftestmake
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  SET_MAKE=
else
  echo "$ac_t""no" 1>&6
  SET_MAKE="MAKE=${MAKE-make}"
fi


PACKAGE=$PACKAGE

VERSION=$VERSION

if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
fi



missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
echo "configure:782: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (aclocal --version) < /dev/null > /dev/null 2>&1; then
   ACLOCAL=aclocal
   echo "$ac_t""found" 1>&6
else
   ACLOCAL="$missing_dir/missing aclocal"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
echo "configure:795: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (autoconf --version) < /dev/null > /dev/null 2>&1; then
   AUTOCONF=autoconf
   echo "$ac_t""found" 1>&6
else
   AUTOCONF="$missing_dir/missing autoconf"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working automake""... $ac_c" 1>&6
echo "configure:808: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (automake --version) < /dev/null > /dev/null 2>&1; then
   AUTOMAKE=automake
   echo "$ac_t""found" 1>&6
else
   AUTOMAKE="$missing_dir/missing automake"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
echo "configure:821: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (autoheader --version) < /dev/null > /dev/null 2>&1; then
   AUTOHEADER=autoheader
   echo "$ac_t""found" 1>&6
else
   AUTOHEADER="$missing_dir/missing autoheader"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
echo "configure:834: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
   MAKEINFO=makeinfo
   echo "$ac_t""found" 1>&6
else
   MAKEINFO="$missing_dir/missing makeinfo"
   echo "$ac_t""missing" 1>&6
fi



# Specify a configuration file




cat >> confdefs.h <<EOF
#define GLIB_MAJOR_VERSION $GLIB_MAJOR_VERSION
EOF

cat >> confdefs.h <<EOF
#define GLIB_MINOR_VERSION $GLIB_MINOR_VERSION
EOF

cat >> confdefs.h <<EOF
#define GLIB_MICRO_VERSION $GLIB_MICRO_VERSION
EOF

cat >> confdefs.h <<EOF
#define GLIB_INTERFACE_AGE $GLIB_INTERFACE_AGE
EOF

cat >> confdefs.h <<EOF
#define GLIB_BINARY_AGE $GLIB_BINARY_AGE
EOF


# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
  enableval="$enable_shared"
  p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
  enable_shared=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_shared=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_shared=yes
fi

# Check whether --enable-static or --disable-static was given.
if test "${enable_static+set}" = set; then
  enableval="$enable_static"
  p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
  enable_static=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_static=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_static=yes
fi

# Check whether --enable-fast-install or --disable-fast-install was given.
if test "${enable_fast_install+set}" = set; then
  enableval="$enable_fast_install"
  p=${PACKAGE-default}
case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
  enable_fast_install=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_fast_install=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_fast_install=yes
fi


# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi

echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:950: checking host system type" >&5

host_alias=$host
case "$host_alias" in
NONE)
  case $nonopt in
  NONE)
    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
    fi ;;
  *) host_alias=$nonopt ;;
  esac ;;
esac

host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6

echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:971: checking build system type" >&5

build_alias=$build
case "$build_alias" in
NONE)
  case $nonopt in
  NONE) build_alias=$host_alias ;;
  *) build_alias=$nonopt ;;
  esac ;;
esac

build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6

# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:991: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$RANLIB"; then
  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_RANLIB="ranlib"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
  echo "$ac_t""$RANLIB" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1021: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="gcc"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$CC"; then
  # Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1051: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_prog_rejected=no
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
	continue
      fi
      ac_cv_prog_CC="cc"
      break
    fi
  done
  IFS="$ac_save_ifs"
if test $ac_prog_rejected = yes; then
  # We found a bogon in the path, so make sure we never use it.
  set dummy $ac_cv_prog_CC
  shift
  if test $# -gt 0; then
    # We chose a different compiler from the bogus one.
    # However, it has the same basename, so the bogon will be chosen
    # first if we set CC to just the basename; use the full file name.
    shift
    set dummy "$ac_dir/$ac_word" "$@"
    shift
    ac_cv_prog_CC="$@"
  fi
fi
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  if test -z "$CC"; then
    case "`uname -s`" in
    *win32* | *WIN32*)
      # Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1102: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="cl"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
 ;;
    esac
  fi
  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi

echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1134: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

cat > conftest.$ac_ext << EOF

#line 1145 "configure"
#include "confdefs.h"

main(){return(0);}
EOF
if { (eval echo configure:1150: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  ac_cv_prog_cc_works=yes
  # If we can't run a trivial program, we are probably using a cross compiler.
  if (./conftest; exit) 2>/dev/null; then
    ac_cv_prog_cc_cross=no
  else
    ac_cv_prog_cc_cross=yes
  fi
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  ac_cv_prog_cc_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:1176: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross

echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:1181: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.c <<EOF
#ifdef __GNUC__
  yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1190: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
  ac_cv_prog_gcc=yes
else
  ac_cv_prog_gcc=no
fi
fi

echo "$ac_t""$ac_cv_prog_gcc" 1>&6

if test $ac_cv_prog_gcc = yes; then
  GCC=yes
else
  GCC=
fi

ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:1209: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
  ac_cv_prog_cc_g=yes
else
  ac_cv_prog_cc_g=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
  CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
  if test "$GCC" = yes; then
    CFLAGS="-g -O2"
  else
    CFLAGS="-g"
  fi
else
  if test "$GCC" = yes; then
    CFLAGS="-O2"
  else
    CFLAGS=
  fi
fi

# Check whether --with-gnu-ld or --without-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
  withval="$with_gnu_ld"
  test "$withval" = no || with_gnu_ld=yes
else
  with_gnu_ld=no
fi

ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
echo "configure:1252: checking for ld used by GCC" >&5
  ac_prog=`($CC -print-prog-name=ld) 2>&5`
  case "$ac_prog" in
    # Accept absolute paths.
    [\\/]* | [A-Za-z]:[\\/]*)
      re_direlt='/[^/][^/]*/\.\./'
      # Canonicalize the path of ld
      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
echo "configure:1276: checking for GNU ld" >&5
else
  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
echo "configure:1279: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -z "$LD"; then
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      ac_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some GNU ld's only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
	test "$with_gnu_ld" != no && break
      else
	test "$with_gnu_ld" != yes && break
      fi
    fi
  done
  IFS="$ac_save_ifs"
else
  ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi

LD="$ac_cv_path_LD"
if test -n "$LD"; then
  echo "$ac_t""$LD" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }

echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
echo "configure:1315: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
  ac_cv_prog_gnu_ld=yes
else
  ac_cv_prog_gnu_ld=no
fi
fi

echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6


echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
echo "configure:1331: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$NM"; then
  # Let the user override the test.
  ac_cv_path_NM="$NM"
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
      # Check to see if the nm accepts a BSD-compat flag.
      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
      #   nm: unknown option "B" ignored
      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	ac_cv_path_NM="$ac_dir/nm -B"
	break
      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	ac_cv_path_NM="$ac_dir/nm -p"
	break
      else
	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
	continue # so that we can try to find one that supports BSD flags
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi
fi

NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6


echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
echo "configure:1368: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  rm -f conftestdata
if ln -s X conftestdata 2>/dev/null
then
  rm -f conftestdata
  ac_cv_prog_LN_S="ln -s"
else
  ac_cv_prog_LN_S=ln
fi
fi
LN_S="$ac_cv_prog_LN_S"
if test "$ac_cv_prog_LN_S" = "ln -s"; then
  echo "$ac_t""yes" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"


# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then
  enableval="$enable_libtool_lock"
  :
fi

test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"

# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$host" in
*-*-irix6*)
  # Find out which ABI we are using.
  echo '#line 1412 "configure"' > conftest.$ac_ext
  if { (eval echo configure:1413: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
    case "`/usr/bin/file conftest.o`" in
    *32-bit*)
      LD="${LD-ld} -32"
      ;;
    *N32*)
      LD="${LD-ld} -n32"
      ;;
    *64-bit*)
      LD="${LD-ld} -64"
      ;;
    esac
  fi
  rm -rf conftest*
  ;;

*-*-sco3.2v5*)
  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
  SAVE_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -belf"
  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
echo "configure:1434: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1439 "configure"
#include "confdefs.h"

int main() {

; return 0; }
EOF
if { (eval echo configure:1446: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  lt_cv_cc_needs_belf=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  lt_cv_cc_needs_belf=no
fi
rm -f conftest*
fi

echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
    CFLAGS="$SAVE_CFLAGS"
  fi
  ;;


esac


# Save cache, so that ltconfig can load it
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache


# Actually configure libtool.  ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }

# Reload cache, that may have been modified by ltconfig
if test -r "$cache_file"; then
  echo "loading cache $cache_file"
  . $cache_file
else
  echo "creating cache $cache_file"
  > $cache_file
fi


# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"

# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'

# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log


echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
echo "configure:1549: checking whether to enable maintainer-specific portions of Makefiles" >&5
    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
  enableval="$enable_maintainer_mode"
  USE_MAINTAINER_MODE=$enableval
else
  USE_MAINTAINER_MODE=no
fi

  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
  

if test $USE_MAINTAINER_MODE = yes; then
  MAINTAINER_MODE_TRUE=
  MAINTAINER_MODE_FALSE='#'
else
  MAINTAINER_MODE_TRUE='#'
  MAINTAINER_MODE_FALSE=
fi
  MAINT=$MAINTAINER_MODE_TRUE
  



# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi

echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:1579: checking host system type" >&5

host_alias=$host
case "$host_alias" in
NONE)
  case $nonopt in
  NONE)
    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
    fi ;;
  *) host_alias=$nonopt ;;
  esac ;;
esac

host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6


echo $ac_n "checking for the BeOS""... $ac_c" 1>&6
echo "configure:1601: checking for the BeOS" >&5
case $host in
  *-*-beos*)
    cat >> confdefs.h <<\EOF
#define GLIB_NATIVE_BEOS 1
EOF

    glib_native_beos="yes"
    echo "$ac_t""$glib_native_beos" 1>&6
    ;;
  default)
    glib_native_beos="no"
    echo "$ac_t""$glib_native_beos" 1>&6
    ;;
esac


# Check whether --enable-debug or --disable-debug was given.
if test "${enable_debug+set}" = set; then
  enableval="$enable_debug"
  :
else
  enable_debug=$debug_default
fi

# Check whether --enable-mem_check or --disable-mem_check was given.
if test "${enable_mem_check+set}" = set; then
  enableval="$enable_mem_check"
  :
else
  enable_mem_check=no
fi

# Check whether --enable-mem_profile or --disable-mem_profile was given.
if test "${enable_mem_profile+set}" = set; then
  enableval="$enable_mem_profile"
  :
else
  enable_mem_profile=no
fi

# Check whether --enable-ansi or --disable-ansi was given.
if test "${enable_ansi+set}" = set; then
  enableval="$enable_ansi"
  :
else
  enable_ansi=no
fi

# Check whether --enable-threads or --disable-threads was given.
if test "${enable_threads+set}" = set; then
  enableval="$enable_threads"
  :
else
  enable_threads=yes
fi


if test "x$enable_threads" != "xyes"; then
  enable_threads=no
fi

echo $ac_n "checking whether to enable memory checking""... $ac_c" 1>&6
echo "configure:1664: checking whether to enable memory checking" >&5
if test "x$enable_mem_check" = "xyes"; then
  cat >> confdefs.h <<\EOF
#define ENABLE_MEM_CHECK 1
EOF

  
  echo "$ac_t""yes" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

echo $ac_n "checking whether to enable memory profiling""... $ac_c" 1>&6
echo "configure:1677: checking whether to enable memory profiling" >&5
if test "x$enable_mem_profile" = "xyes"; then
  cat >> confdefs.h <<\EOF
#define ENABLE_MEM_PROFILE 1
EOF

  
  echo "$ac_t""yes" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test "x$enable_debug" = "xyes"; then
  test "$cflags_set" = set || CFLAGS="$CFLAGS -g"
  GLIB_DEBUG_FLAGS="-DG_ENABLE_DEBUG"
else
  if test "x$enable_debug" = "xno"; then
    GLIB_DEBUG_FLAGS="-DG_DISABLE_ASSERT -DG_DISABLE_CHECKS"
  fi
fi

cat >> confdefs.h <<EOF
#define G_COMPILED_WITH_DEBUGGING "${enable_debug}"
EOF


# Checks for programs.
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1707: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="gcc"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$CC"; then
  # Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1737: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_prog_rejected=no
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
	continue
      fi
      ac_cv_prog_CC="cc"
      break
    fi
  done
  IFS="$ac_save_ifs"
if test $ac_prog_rejected = yes; then
  # We found a bogon in the path, so make sure we never use it.
  set dummy $ac_cv_prog_CC
  shift
  if test $# -gt 0; then
    # We chose a different compiler from the bogus one.
    # However, it has the same basename, so the bogon will be chosen
    # first if we set CC to just the basename; use the full file name.
    shift
    set dummy "$ac_dir/$ac_word" "$@"
    shift
    ac_cv_prog_CC="$@"
  fi
fi
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  if test -z "$CC"; then
    case "`uname -s`" in
    *win32* | *WIN32*)
      # Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1788: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="cl"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
 ;;
    esac
  fi
  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi

echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1820: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

cat > conftest.$ac_ext << EOF

#line 1831 "configure"
#include "confdefs.h"

main(){return(0);}
EOF
if { (eval echo configure:1836: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  ac_cv_prog_cc_works=yes
  # If we can't run a trivial program, we are probably using a cross compiler.
  if (./conftest; exit) 2>/dev/null; then
    ac_cv_prog_cc_cross=no
  else
    ac_cv_prog_cc_cross=yes
  fi
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  ac_cv_prog_cc_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:1862: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross

echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:1867: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.c <<EOF
#ifdef __GNUC__
  yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
  ac_cv_prog_gcc=yes
else
  ac_cv_prog_gcc=no
fi
fi

echo "$ac_t""$ac_cv_prog_gcc" 1>&6

if test $ac_cv_prog_gcc = yes; then
  GCC=yes
else
  GCC=
fi

ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:1895: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
  ac_cv_prog_cc_g=yes
else
  ac_cv_prog_cc_g=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
  CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
  if test "$GCC" = yes; then
    CFLAGS="-g -O2"
  else
    CFLAGS="-g"
  fi
else
  if test "$GCC" = yes; then
    CFLAGS="-O2"
  else
    CFLAGS=
  fi
fi




echo $ac_n "checking for ${CC-cc} option to accept ANSI C""... $ac_c" 1>&6
echo "configure:1930: checking for ${CC-cc} option to accept ANSI C" >&5
if eval "test \"`echo '$''{'am_cv_prog_cc_stdc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  am_cv_prog_cc_stdc=no
ac_save_CC="$CC"
# Don't try gcc -ansi; that turns off useful extensions and
# breaks some systems' header files.
# AIX			-qlanglvl=ansi
# Ultrix and OSF/1	-std1
# HP-UX			-Aa -D_HPUX_SOURCE
# SVR4			-Xc -D__EXTENSIONS__
for ac_arg in "" -qlanglvl=ansi -std1 "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
do
  CC="$ac_save_CC $ac_arg"
  cat > conftest.$ac_ext <<EOF
#line 1946 "configure"
#include "confdefs.h"
#include <stdarg.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
struct buf { int x; };
FILE * (*rcsopen) (struct buf *, struct stat *, int);
static char *e (p, i)
     char **p;
     int i;
{
  return p[i];
}
static char *f (char * (*g) (char **, int), char **p, ...)
{
  char *s;
  va_list v;
  va_start (v,p);
  s = g (p, va_arg (v,int));
  va_end (v);
  return s;
}
int test (int i, double x);
struct s1 {int (*f) (int a);};
struct s2 {int (*f) (double a);};
int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
int argc;
char **argv;

int main() {

return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];

; return 0; }
EOF
if { (eval echo configure:1983: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  am_cv_prog_cc_stdc="$ac_arg"; break
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
done
CC="$ac_save_CC"

fi

if test -z "$am_cv_prog_cc_stdc"; then
  echo "$ac_t""none needed" 1>&6
else
  echo "$ac_t""$am_cv_prog_cc_stdc" 1>&6
fi
case "x$am_cv_prog_cc_stdc" in
  x|xno) ;;
  *) CC="$CC $am_cv_prog_cc_stdc" ;;
esac

# Find a good install program.  We prefer a C program (faster),
# so one script is as good as another.  But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:2018: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
  for ac_dir in $PATH; do
    # Account for people who put trailing slashes in PATH elements.
    case "$ac_dir/" in
    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
    *)
      # OSF1 and SCO ODT 3.0 have their own names for install.
      # Don't use installbsd from OSF since it installs stuff as root
      # by default.
      for ac_prog in ginstall scoinst install; do
        if test -f $ac_dir/$ac_prog; then
	  if test $ac_prog = install &&
            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
	    # AIX install.  It has an incompatible calling convention.
	    :
	  else
	    ac_cv_path_install="$ac_dir/$ac_prog -c"
	    break 2
	  fi
	fi
      done
      ;;
    esac
  done
  IFS="$ac_save_IFS"

fi
  if test "${ac_cv_path_install+set}" = set; then
    INSTALL="$ac_cv_path_install"
  else
    # As a last resort, use the slow shell script.  We don't cache a
    # path for INSTALL within a source directory, because that will
    # break other packages using the cache if that directory is
    # removed, or if the path is relative.
    INSTALL="$ac_install_sh"
  fi
fi
echo "$ac_t""$INSTALL" 1>&6

# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'

test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'

test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'


if test "x$GCC" = "xyes"; then
  case " $CFLAGS " in
  *[\ \	]-Wall[\ \	]*) ;;
  *) CFLAGS="$CFLAGS -Wall" ;;
  esac

  if test "x$enable_ansi" = "xyes"; then
    case " $CFLAGS " in
    *[\ \	]-ansi[\ \	]*) ;;
    *) CFLAGS="$CFLAGS -ansi" ;;
    esac

    case " $CFLAGS " in
    *[\ \	]-pedantic[\ \	]*) ;;
    *) CFLAGS="$CFLAGS -pedantic" ;;
    esac
  fi
fi

echo $ac_n "checking for extra flags to get ANSI library prototypes""... $ac_c" 1>&6
echo "configure:2091: checking for extra flags to get ANSI library prototypes" >&5
glib_save_LIBS=$LIBS
LIBS="$LIBS -lm"
if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 2098 "configure"
#include "confdefs.h"
#include <math.h>
             int main (void) { return (log(1) != log(1.)); }
EOF
if { (eval echo configure:2103: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  echo "$ac_t""none needed" 1>&6
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  glib_save_CFLAGS=$CFLAGS
     CFLAGS="$CFLAGS -std1"
     if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 2116 "configure"
#include "confdefs.h"
#include <math.h>
                 int main (void) { return (log(1) != log(1.)); }
EOF
if { (eval echo configure:2121: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  echo "$ac_t""-std1" 1>&6
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  echo "$ac_t""" 1>&6
         CFLAGS=$glib_save_CFLAGS
         echo "configure: warning: No ANSI prototypes found in library. (-std1 didn't work.)" 1>&2
     
fi
rm -fr conftest*
fi


fi
rm -fr conftest*
fi

LIBS=$glib_save_LIBS

echo $ac_n "checking for extra flags for POSIX compliance""... $ac_c" 1>&6
echo "configure:2144: checking for extra flags for POSIX compliance" >&5
cat > conftest.$ac_ext <<EOF
#line 2146 "configure"
#include "confdefs.h"
#include <dirent.h>
int main() {
DIR *dir;
; return 0; }
EOF
if { (eval echo configure:2153: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  echo "$ac_t""none needed" 1>&6
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  glib_save_CFLAGS=$CFLAGS
  CFLAGS="$CFLAGS -posix"
  cat > conftest.$ac_ext <<EOF
#line 2163 "configure"
#include "confdefs.h"
#include <dirent.h>
int main() {
DIR *dir;
; return 0; }
EOF
if { (eval echo configure:2170: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  echo "$ac_t""-posix" 1>&6
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  echo "$ac_t""" 1>&6
    CFLAGS=$glib_save_CFLAGS
    echo "configure: warning: Could not determine POSIX flag. (-posix didn't work.)" 1>&2
fi
rm -f conftest*
fi
rm -f conftest*

# Checks for header files.
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
echo "configure:2187: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
  CPP=
fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    # This must be in double quotes, not single quotes, because CPP may get
  # substituted into the Makefile and "${CC-cc}" will confuse make.
  CPP="${CC-cc} -E"
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp.
  cat > conftest.$ac_ext <<EOF
#line 2202 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2208: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -E -traditional-cpp"
  cat > conftest.$ac_ext <<EOF
#line 2219 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2225: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -nologo -E"
  cat > conftest.$ac_ext <<EOF
#line 2236 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2242: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP=/lib/cpp
fi
rm -f conftest*
fi
rm -f conftest*
fi
rm -f conftest*
  ac_cv_prog_CPP="$CPP"
fi
  CPP="$ac_cv_prog_CPP"
else
  ac_cv_prog_CPP="$CPP"
fi
echo "$ac_t""$CPP" 1>&6

echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
echo "configure:2267: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2272 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2280: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  ac_cv_header_stdc=yes
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

if test $ac_cv_header_stdc = yes; then
  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 2297 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "memchr" >/dev/null 2>&1; then
  :
else
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 2315 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "free" >/dev/null 2>&1; then
  :
else
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
if test "$cross_compiling" = yes; then
  :
else
  cat > conftest.$ac_ext <<EOF
#line 2336 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
int main () { int i; for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
exit (0); }

EOF
if { (eval echo configure:2347: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_header_stdc=no
fi
rm -fr conftest*
fi

fi
fi

echo "$ac_t""$ac_cv_header_stdc" 1>&6
if test $ac_cv_header_stdc = yes; then
  cat >> confdefs.h <<\EOF
#define STDC_HEADERS 1
EOF

fi


# Checks for library functions.
echo $ac_n "checking for vprintf""... $ac_c" 1>&6
echo "configure:2373: checking for vprintf" >&5
if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2378 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char vprintf(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char vprintf();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_vprintf) || defined (__stub___vprintf)
choke me
#else
vprintf();
#endif

; return 0; }
EOF
if { (eval echo configure:2401: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_vprintf=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_vprintf=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'vprintf`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<\EOF
#define HAVE_VPRINTF 1
EOF

else
  echo "$ac_t""no" 1>&6
fi

if test "$ac_cv_func_vprintf" != yes; then
echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
echo "configure:2425: checking for _doprnt" >&5
if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2430 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char _doprnt(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char _doprnt();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub__doprnt) || defined (__stub____doprnt)
choke me
#else
_doprnt();
#endif

; return 0; }
EOF
if { (eval echo configure:2453: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func__doprnt=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func__doprnt=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'_doprnt`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<\EOF
#define HAVE_DOPRNT 1
EOF

else
  echo "$ac_t""no" 1>&6
fi

fi


for ac_func in atexit on_exit
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2481: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2486 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:2509: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


echo $ac_n "checking size of char""... $ac_c" 1>&6
echo "configure:2535: checking size of char" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_char'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 2543 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(char));
  exit(0);
}
EOF
if { (eval echo configure:2554: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_char=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_char=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_char" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_CHAR $ac_cv_sizeof_char
EOF


echo $ac_n "checking size of short""... $ac_c" 1>&6
echo "configure:2574: checking size of short" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 2582 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(short));
  exit(0);
}
EOF
if { (eval echo configure:2593: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_short=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_short=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_short" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_SHORT $ac_cv_sizeof_short
EOF


echo $ac_n "checking size of long""... $ac_c" 1>&6
echo "configure:2613: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 2621 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(long));
  exit(0);
}
EOF
if { (eval echo configure:2632: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_long=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_long=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_long" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_LONG $ac_cv_sizeof_long
EOF


echo $ac_n "checking size of int""... $ac_c" 1>&6
echo "configure:2652: checking size of int" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 2660 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(int));
  exit(0);
}
EOF
if { (eval echo configure:2671: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_int=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_int=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_int" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_INT $ac_cv_sizeof_int
EOF


echo $ac_n "checking size of void *""... $ac_c" 1>&6
echo "configure:2691: checking size of void *" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_void_p'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 2699 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(void *));
  exit(0);
}
EOF
if { (eval echo configure:2710: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_void_p=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_void_p=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_void_p" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_VOID_P $ac_cv_sizeof_void_p
EOF


echo $ac_n "checking size of long long""... $ac_c" 1>&6
echo "configure:2730: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 2738 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(long long));
  exit(0);
}
EOF
if { (eval echo configure:2749: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_long_long=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_long_long=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_long_long" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
EOF



if test x$ac_cv_sizeof_long_long = x8; then
	# long long is a 64 bit integer.
	echo $ac_n "checking for format to printf and scanf a gint64""... $ac_c" 1>&6
echo "configure:2772: checking for format to printf and scanf a gint64" >&5
	if eval "test \"`echo '$''{'glib_cv_long_long_format'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
		if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 2781 "configure"
#include "confdefs.h"
#include <stdio.h>  
			int main()
			{
			  long long b, a = -0x3AFAFAFAFAFAFAFALL;
			  char buffer[1000];
			  sprintf (buffer, "%llu", a);
  			  sscanf (buffer, "%llu", &b);
			  exit (b!=a);
			}
			
EOF
if { (eval echo configure:2794: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  glib_cv_long_long_format=ll
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  glib_cv_long_long_format=q
fi
rm -fr conftest*
fi

fi

	echo "$ac_t""%${glib_cv_long_long_format}i" 1>&6
fi

echo $ac_n "checking for working const""... $ac_c" 1>&6
echo "configure:2812: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2817 "configure"
#include "confdefs.h"

int main() {

/* Ultrix mips cc rejects this.  */
typedef int charset[2]; const charset x;
/* SunOS 4.1.1 cc rejects this.  */
char const *const *ccp;
char **p;
/* NEC SVR4.0.2 mips cc rejects this.  */
struct point {int x, y;};
static struct point const zero = {0,0};
/* AIX XL C 1.02.0.0 rejects this.
   It does not let you subtract one const X* pointer from another in an arm
   of an if-expression whose if-part is not a constant expression */
const char *g = "string";
ccp = &g + (g ? g-g : 0);
/* HPUX 7.0 cc rejects these. */
++ccp;
p = (char**) ccp;
ccp = (char const *const *) p;
{ /* SCO 3.2v4 cc rejects this.  */
  char *t;
  char const *s = 0 ? (char *) 0 : (char const *) 0;

  *t++ = 0;
}
{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
  int x[] = {25, 17};
  const int *foo = &x[0];
  ++foo;
}
{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
  typedef const int *iptr;
  iptr p = 0;
  ++p;
}
{ /* AIX XL C 1.02.0.0 rejects this saying
     "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
  struct s { int j; const int *ap[3]; };
  struct s *b; b->j = 5;
}
{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
  const int foo = 10;
}

; return 0; }
EOF
if { (eval echo configure:2866: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_c_const=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_c_const=no
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_c_const" 1>&6
if test $ac_cv_c_const = no; then
  cat >> confdefs.h <<\EOF
#define const 
EOF

fi


echo $ac_n "checking for __inline""... $ac_c" 1>&6
echo "configure:2888: checking for __inline" >&5
if eval "test \"`echo '$''{'glib_cv_has__inline'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
        if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 2897 "configure"
#include "confdefs.h"

	__inline int foo () { return 0; }
	int main () { return foo (); }
       	
EOF
if { (eval echo configure:2904: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  glib_cv_has__inline=yes
        
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  glib_cv_has__inline=no
        
fi
rm -fr conftest*
fi


fi

echo "$ac_t""$glib_cv_has__inline" 1>&6
case x$glib_cv_has__inline in
xyes) cat >> confdefs.h <<\EOF
#define G_HAVE___INLINE 1
EOF

esac
echo $ac_n "checking for __inline__""... $ac_c" 1>&6
echo "configure:2929: checking for __inline__" >&5
if eval "test \"`echo '$''{'glib_cv_has__inline__'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
        if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 2938 "configure"
#include "confdefs.h"

	__inline__ int foo () { return 0; }
	int main () { return foo (); }
       	
EOF
if { (eval echo configure:2945: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  glib_cv_has__inline__=yes
        
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  glib_cv_has__inline__=no
        
fi
rm -fr conftest*
fi


fi

echo "$ac_t""$glib_cv_has__inline__" 1>&6
case x$glib_cv_has__inline__ in
xyes) cat >> confdefs.h <<\EOF
#define G_HAVE___INLINE__ 1
EOF

esac
echo $ac_n "checking for inline""... $ac_c" 1>&6
echo "configure:2970: checking for inline" >&5
if eval "test \"`echo '$''{'glib_cv_hasinline'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
        if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 2979 "configure"
#include "confdefs.h"

	inline int foo () { return 0; }
	int main () { return foo (); }
       	
EOF
if { (eval echo configure:2986: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  glib_cv_hasinline=yes
        
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  glib_cv_hasinline=no
        
fi
rm -fr conftest*
fi


fi

echo "$ac_t""$glib_cv_hasinline" 1>&6
case x$glib_cv_hasinline in
xyes) cat >> confdefs.h <<\EOF
#define G_HAVE_INLINE 1
EOF

esac

echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
echo "configure:3012: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
#line 3019 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
int main() {

#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
 bogus endian macros
#endif
; return 0; }
EOF
if { (eval echo configure:3030: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  # It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
#line 3034 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
int main() {

#if BYTE_ORDER != BIG_ENDIAN
 not big endian
#endif
; return 0; }
EOF
if { (eval echo configure:3045: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_c_bigendian=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_c_bigendian=no
fi
rm -f conftest*
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
if test $ac_cv_c_bigendian = unknown; then
if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 3065 "configure"
#include "confdefs.h"
main () {
  /* Are we little or big endian?  From Harbison&Steele.  */
  union
  {
    long l;
    char c[sizeof (long)];
  } u;
  u.l = 1;
  exit (u.c[sizeof (long) - 1] == 1);
}
EOF
if { (eval echo configure:3078: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_c_bigendian=no
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_c_bigendian=yes
fi
rm -fr conftest*
fi

fi
fi

echo "$ac_t""$ac_cv_c_bigendian" 1>&6
if test $ac_cv_c_bigendian = yes; then
  cat >> confdefs.h <<\EOF
#define WORDS_BIGENDIAN 1
EOF

fi


for ac_hdr in float.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:3106: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3111 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3116: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 cat >> confdefs.h <<\EOF
#define HAVE_FLOAT_H 1
EOF

else
  echo "$ac_t""no" 1>&6
fi
done

for ac_hdr in limits.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:3149: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3154 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3159: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 cat >> confdefs.h <<\EOF
#define HAVE_LIMITS_H 1
EOF

else
  echo "$ac_t""no" 1>&6
fi
done

for ac_hdr in pwd.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:3192: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3197 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3202: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 cat >> confdefs.h <<\EOF
#define HAVE_PWD_H 1
EOF

else
  echo "$ac_t""no" 1>&6
fi
done

for ac_hdr in sys/param.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:3235: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3240 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3245: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 cat >> confdefs.h <<\EOF
#define HAVE_SYS_PARAM_H 1
EOF

else
  echo "$ac_t""no" 1>&6
fi
done

for ac_hdr in sys/poll.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:3278: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3283 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3288: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 cat >> confdefs.h <<\EOF
#define HAVE_SYS_POLL_H 1
EOF

else
  echo "$ac_t""no" 1>&6
fi
done

for ac_hdr in sys/select.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:3321: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3326 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3331: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 cat >> confdefs.h <<\EOF
#define HAVE_SYS_SELECT_H 1
EOF

else
  echo "$ac_t""no" 1>&6
fi
done

for ac_hdr in sys/time.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:3364: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3369 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3374: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 cat >> confdefs.h <<\EOF
#define HAVE_SYS_TIME_H 1
EOF

else
  echo "$ac_t""no" 1>&6
fi
done

for ac_hdr in sys/times.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:3407: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3412 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3417: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 cat >> confdefs.h <<\EOF
#define HAVE_SYS_TIMES_H 1
EOF

else
  echo "$ac_t""no" 1>&6
fi
done

for ac_hdr in unistd.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:3450: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3455 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3460: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 cat >> confdefs.h <<\EOF
#define HAVE_UNISTD_H 1
EOF

else
  echo "$ac_t""no" 1>&6
fi
done

for ac_hdr in values.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:3493: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3498 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3503: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 cat >> confdefs.h <<\EOF
#define HAVE_VALUES_H 1
EOF

else
  echo "$ac_t""no" 1>&6
fi
done


# Check for some functions
for ac_func in lstat strerror strsignal memmove vsnprintf strcasecmp strncasecmp poll
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:3537: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3542 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:3565: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


# Check for sys_errlist
echo $ac_n "checking for sys_errlist""... $ac_c" 1>&6
echo "configure:3592: checking for sys_errlist" >&5
cat > conftest.$ac_ext <<EOF
#line 3594 "configure"
#include "confdefs.h"

int main() {

extern char *sys_errlist[];
extern int sys_nerr;
sys_errlist[sys_nerr-1][0] = 0;

; return 0; }
EOF
if { (eval echo configure:3605: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  glib_ok=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  glib_ok=no
fi
rm -f conftest*
echo "$ac_t""$glib_ok" 1>&6
if test $glib_ok = no; then
    cat >> confdefs.h <<\EOF
#define NO_SYS_ERRLIST 1
EOF

fi

# Check for sys_siglist
echo $ac_n "checking for sys_siglist""... $ac_c" 1>&6
echo "configure:3625: checking for sys_siglist" >&5
cat > conftest.$ac_ext <<EOF
#line 3627 "configure"
#include "confdefs.h"

int main() {

extern char *sys_siglist[];
strlen (sys_siglist[0]);

; return 0; }
EOF
if { (eval echo configure:3637: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  glib_ok=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  glib_ok=no
fi
rm -f conftest*
echo "$ac_t""$glib_ok" 1>&6
if test $glib_ok = no; then
    cat >> confdefs.h <<\EOF
#define NO_SYS_SIGLIST 1
EOF

fi

# Check for sys_siglist decl (see Tue Jan 19 00:44:24 1999 in changelog)
echo $ac_n "checking for sys_siglist declaration""... $ac_c" 1>&6
echo "configure:3657: checking for sys_siglist declaration" >&5
cat > conftest.$ac_ext <<EOF
#line 3659 "configure"
#include "confdefs.h"
#include <signal.h>
int main() {

strlen (sys_siglist[0]);

; return 0; }
EOF
if { (eval echo configure:3668: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  glib_ok=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  glib_ok=no
fi
rm -f conftest*
echo "$ac_t""$glib_ok" 1>&6
if test $glib_ok = no; then
    cat >> confdefs.h <<\EOF
#define NO_SYS_SIGLIST_DECL 1
EOF

fi

# Check if <sys/select.h> needs to be included for fd_set
echo $ac_n "checking for fd_set""... $ac_c" 1>&6
echo "configure:3688: checking for fd_set" >&5
cat > conftest.$ac_ext <<EOF
#line 3690 "configure"
#include "confdefs.h"
#include <sys/types.h>
int main() {
fd_set readMask, writeMask;
; return 0; }
EOF
if { (eval echo configure:3697: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  gtk_ok=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  gtk_ok=no
fi
rm -f conftest*
if test $gtk_ok = yes; then
    echo "$ac_t""yes, found in sys/types.h" 1>&6
else
    cat > conftest.$ac_ext <<EOF
#line 3711 "configure"
#include "confdefs.h"
#include <sys/select.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "fd_set" >/dev/null 2>&1; then
  rm -rf conftest*
  gtk_ok=yes
fi
rm -f conftest*

    if test $gtk_ok = yes; then
        cat >> confdefs.h <<\EOF
#define HAVE_SYS_SELECT_H 1
EOF

        echo "$ac_t""yes, found in sys/select.h" 1>&6
    else
	cat >> confdefs.h <<\EOF
#define NO_FD_SET 1
EOF

	echo "$ac_t""no" 1>&6
    fi
fi

echo $ac_n "checking whether realloc (NULL,) will work""... $ac_c" 1>&6
echo "configure:3738: checking whether realloc (NULL,) will work" >&5
if eval "test \"`echo '$''{'glib_cv_sane_realloc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
        if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 3747 "configure"
#include "confdefs.h"

        #include <stdlib.h>
        int main() {
          return realloc (0, sizeof (int)) == 0;
        }
EOF
if { (eval echo configure:3755: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  glib_cv_sane_realloc=yes
        cat >> confdefs.h <<\EOF
#define REALLOC_0_WORKS 1
EOF

        
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  glib_cv_sane_realloc=no
        
fi
rm -fr conftest*
fi


fi

echo "$ac_t""$glib_cv_sane_realloc" 1>&6


echo $ac_n "checking for an implementation of va_copy()""... $ac_c" 1>&6
echo "configure:3780: checking for an implementation of va_copy()" >&5
if eval "test \"`echo '$''{'glib_cv_va_copy'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
	if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 3789 "configure"
#include "confdefs.h"

	#include <stdarg.h>
	void f (int i, ...) {
	va_list args1, args2;
	va_start (args1, i);
	va_copy (args2, args1);
	if (va_arg (args2, int) != 42 || va_arg (args1, int) != 42)
	  exit (1);
	va_end (args1); va_end (args2);
	}
	int main() {
	  f (0, 42);
	  return 0;
	}
EOF
if { (eval echo configure:3806: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  glib_cv_va_copy=yes
	
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  glib_cv_va_copy=no
	
fi
rm -fr conftest*
fi


fi

echo "$ac_t""$glib_cv_va_copy" 1>&6
echo $ac_n "checking for an implementation of __va_copy()""... $ac_c" 1>&6
echo "configure:3825: checking for an implementation of __va_copy()" >&5
if eval "test \"`echo '$''{'glib_cv___va_copy'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
	if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 3834 "configure"
#include "confdefs.h"

	#include <stdarg.h>
	void f (int i, ...) {
	va_list args1, args2;
	va_start (args1, i);
	__va_copy (args2, args1);
	if (va_arg (args2, int) != 42 || va_arg (args1, int) != 42)
	  exit (1);
	va_end (args1); va_end (args2);
	}
	int main() {
	  f (0, 42);
	  return 0;
	}
EOF
if { (eval echo configure:3851: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  glib_cv___va_copy=yes
	
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  glib_cv___va_copy=no
	
fi
rm -fr conftest*
fi


fi

echo "$ac_t""$glib_cv___va_copy" 1>&6
echo $ac_n "checking whether va_lists can be copied by value""... $ac_c" 1>&6
echo "configure:3870: checking whether va_lists can be copied by value" >&5
if eval "test \"`echo '$''{'glib_cv_va_val_copy'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
	if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 3879 "configure"
#include "confdefs.h"

	#include <stdarg.h>
	void f (int i, ...) {
	va_list args1, args2;
	va_start (args1, i);
	args2 = args1;
	if (va_arg (args2, int) != 42 || va_arg (args1, int) != 42)
	  exit (1);
	va_end (args1); va_end (args2);
	}
	int main() {
	  f (0, 42);
	  return 0;
	}
EOF
if { (eval echo configure:3896: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  glib_cv_va_val_copy=yes
	
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  glib_cv_va_val_copy=no
	
fi
rm -fr conftest*
fi


fi

if test "x$glib_cv_va_copy" = "xyes"; then
  cat >> confdefs.h <<\EOF
#define G_VA_COPY va_copy
EOF

else if test "x$glib_cv___va_copy" = "xyes"; then
  cat >> confdefs.h <<\EOF
#define G_VA_COPY __va_copy
EOF

fi
fi
if test "x$glib_cv_va_val_copy" = "xno"; then
  cat >> confdefs.h <<\EOF
#define G_VA_COPY_AS_ARRAY 1
EOF

fi
echo "$ac_t""$glib_cv_va_val_copy" 1>&6


G_MODULE_LIBS=
G_MODULE_PLUGIN_LIBS=
G_MODULE_LDFLAGS=
G_MODULE_NEED_USCORE=0
G_MODULE_HAVE_DLERROR=0
if test -z "$G_MODULE_IMPL"; then
	echo $ac_n "checking for dlopen""... $ac_c" 1>&6
echo "configure:3941: checking for dlopen" >&5
if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3946 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char dlopen(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlopen();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_dlopen) || defined (__stub___dlopen)
choke me
#else
dlopen();
#endif

; return 0; }
EOF
if { (eval echo configure:3969: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_dlopen=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_dlopen=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  echo $ac_n "checking for dlsym""... $ac_c" 1>&6
echo "configure:3984: checking for dlsym" >&5
if eval "test \"`echo '$''{'ac_cv_func_dlsym'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3989 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char dlsym(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlsym();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_dlsym) || defined (__stub___dlsym)
choke me
#else
dlsym();
#endif

; return 0; }
EOF
if { (eval echo configure:4012: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_dlsym=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_dlsym=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'dlsym`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  G_MODULE_IMPL=G_MODULE_IMPL_DL
		
else
  echo "$ac_t""no" 1>&6
fi

	
else
  echo "$ac_t""no" 1>&6
fi

fi
if test -z "$G_MODULE_IMPL" -a "x$glib_native_beos" = "xyes"; then
  echo $ac_n "checking for load_image in -lroot""... $ac_c" 1>&6
echo "configure:4040: checking for load_image in -lroot" >&5
ac_lib_var=`echo root'_'load_image | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lroot  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4048 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char load_image();

int main() {
load_image()
; return 0; }
EOF
if { (eval echo configure:4059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  G_MODULE_LIBS="-lbe -lroot -L\$(top_builddir_full)/.libs -lglib"
      G_MODULE_PLUGIN_LIBS="-L\$(top_builddir_full)/gmodule/.libs -lgmodule"
      G_MODULE_IMPL=G_MODULE_IMPL_BEOS 

else
  echo "$ac_t""no" 1>&6
fi

fi   
if test -z "$G_MODULE_IMPL"; then
	echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
echo "configure:4085: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldl  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4093 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlopen();

int main() {
dlopen()
; return 0; }
EOF
if { (eval echo configure:4104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  echo $ac_n "checking for dlsym in -ldl""... $ac_c" 1>&6
echo "configure:4120: checking for dlsym in -ldl" >&5
ac_lib_var=`echo dl'_'dlsym | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldl  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4128 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlsym();

int main() {
dlsym()
; return 0; }
EOF
if { (eval echo configure:4139: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  G_MODULE_LIBS=-ldl
			G_MODULE_IMPL=G_MODULE_IMPL_DL
		
else
  echo "$ac_t""no" 1>&6
fi

	
else
  echo "$ac_t""no" 1>&6
fi

fi
if test -z "$G_MODULE_IMPL"; then
        echo $ac_n "checking how to export all symbols""... $ac_c" 1>&6
echo "configure:4169: checking how to export all symbols" >&5
        SAVED_LDFLAGS=$LDFLAGS
        LDFLAGS="$LDFLAGS -Wl,-E"
        cat > conftest.$ac_ext <<EOF
#line 4173 "configure"
#include "confdefs.h"

int main() {
 return 0; 
; return 0; }
EOF
if { (eval echo configure:4180: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
   G_MODULE_LDFLAGS="-Wl,-E" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
                LDFLAGS="$SAVED_LDFLAGS -bexpall"
                cat > conftest.$ac_ext <<EOF
#line 4190 "configure"
#include "confdefs.h"

int main() {
 return 0; 
; return 0; }
EOF
if { (eval echo configure:4197: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  G_MODULE_LDFLAGS="-bexpall"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  G_MODULE_LDFLAGS="none"
                
fi
rm -f conftest*
        
fi
rm -f conftest*
        LDFLAGS=$SAVED_LDFLAGS
        echo "$ac_t""$G_MODULE_LDFLAGS" 1>&6
        if test "x$G_MODULE_LDFLAGS" = "xnone"; then
                G_MODULE_LDFLAGS=
        fi
	echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
echo "configure:4217: checking for shl_load in -ldld" >&5
ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldld  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4225 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char shl_load();

int main() {
shl_load()
; return 0; }
EOF
if { (eval echo configure:4236: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  G_MODULE_LIBS=-ldld
		G_MODULE_IMPL=G_MODULE_IMPL_DLD
	
else
  echo "$ac_t""no" 1>&6
fi

fi
if test "$G_MODULE_IMPL" = "G_MODULE_IMPL_DL"; then
	case "$host_os" in
	  linux*)
	    G_MODULE_LDFLAGS='-rdynamic'
	    ;;
	esac
	LIBS_orig="$LIBS"
	LDFLAGS_orig="$LDFLAGS"
	LIBS="$LIBS $G_MODULE_LIBS"
	LDFLAGS="$LDFLAGS $G_MODULE_LDFLAGS"
	echo $ac_n "checking for preceeding underscore in symbols""... $ac_c" 1>&6
echo "configure:4270: checking for preceeding underscore in symbols" >&5
	if eval "test \"`echo '$''{'glib_cv_uscore'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
		if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 4279 "configure"
#include "confdefs.h"

		#include <dlfcn.h>
                int glib_underscore_test (void) { return 42; }
		int main() {
		  void *f1 = (void*)0, *f2 = (void*)0, *handle;
		  handle = dlopen ((void*)0, 0);
		  if (handle) {
		    f1 = dlsym (handle, "glib_underscore_test");
		    f2 = dlsym (handle, "_glib_underscore_test");
		  } return (!f2 || f1);
		}
EOF
if { (eval echo configure:4293: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  glib_cv_uscore=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  glib_cv_uscore=no
fi
rm -fr conftest*
fi

		rm -f plugin.c plugin.o plugin.lo
	
fi

	echo "$ac_t""$glib_cv_uscore" 1>&6
	if test "x$glib_cv_uscore" = "xyes"; then
  		G_MODULE_NEED_USCORE=1
	else
  		G_MODULE_NEED_USCORE=0
	fi

	LDFLAGS="$LDFLAGS_orig"
	echo $ac_n "checking for dlerror""... $ac_c" 1>&6
echo "configure:4318: checking for dlerror" >&5
if eval "test \"`echo '$''{'ac_cv_func_dlerror'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4323 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char dlerror(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlerror();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_dlerror) || defined (__stub___dlerror)
choke me
#else
dlerror();
#endif

; return 0; }
EOF
if { (eval echo configure:4346: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_dlerror=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_dlerror=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'dlerror`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  G_MODULE_HAVE_DLERROR=1
else
  echo "$ac_t""no" 1>&6
G_MODULE_HAVE_DLERROR=0
fi

	LIBS="$LIBS_orig"
fi
if test -z "$G_MODULE_IMPL"; then
	G_MODULE_IMPL=0
fi










# Check whether --with-threads or --without-threads was given.
if test "${with_threads+set}" = set; then
  withval="$with_threads"
  if test "x$with_threads" = x; then
		want_threads=yes
	else
		want_threads=$with_threads
	fi
else
  want_threads=yes
fi

if test "x$enable_threads" = "xno"; then
        want_threads=no
fi
if test "x$want_threads" = "xnone"; then
	want_threads=no
fi


THREAD_NO_IMPLEMENTATION="You do not have any known thread system on your
                computer. GLib will not have a default thread implementation."

FLAG_DOES_NOT_WORK="I can't find the MACRO, that enables thread safety on your
                platform (normaly it's "_REENTRANT"). I'll not use any flag on
                compilation now, but then your programs might not work.
                Please provide information on how it is done on your system."

LIBS_NOT_FOUND_1="I can't find the libraries for the thread implementation
		"

LIBS_NOT_FOUND_2=". Please choose another thread implementation or
		provide information on your thread implementation.
		You can also run 'configure --disable-threads' 
		to compile without thread support."

FUNC_NO_GETPWUID_R="the 'g_get_(user_name|real_name|home_dir|tmp_dir)'
		functions will not be MT-safe during their first call because
		there is no working 'getpwuid_r' on your system."

FUNC_NO_LOCALTIME_R="the 'g_date_set_time' function will not be MT-safe
		because there is no 'localtime_r' on your system."


have_threads=none
if test "x$want_threads" = xyes || test "x$want_threads" = xsolaris; then
       	case $host in
               	*-*-solaris*)
              	echo $ac_n "checking for cond_init in -lthread""... $ac_c" 1>&6
echo "configure:4430: checking for cond_init in -lthread" >&5
ac_lib_var=`echo thread'_'cond_init | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lthread  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4438 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char cond_init();

int main() {
cond_init()
; return 0; }
EOF
if { (eval echo configure:4449: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  have_threads=solaris
else
  echo "$ac_t""no" 1>&6
fi

		;;
	esac
fi
if test "x$want_threads" = xyes || test "x$want_threads" = xposix \
				|| test "x$want_threads" = xdce; then
	# -D_POSIX4A_DRAFT10_SOURCE is for DG/UX
	# -U_OSF_SOURCE if for Digital UNIX 4.0d
	GTHREAD_COMPILE_IMPL_DEFINES="-D_POSIX4A_DRAFT10_SOURCE -U_OSF_SOURCE"
	glib_save_CPPFLAGS="$CPPFLAGS"
	CPPFLAGS="$CPPFLAGS $GTHREAD_COMPILE_IMPL_DEFINES"
        if test "x$have_threads" = xnone; then
                cat > conftest.$ac_ext <<EOF
#line 4481 "configure"
#include "confdefs.h"
#include <pthread.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "[^a-zA-Z_]pthread_attr_init[^a-zA-Z_]" >/dev/null 2>&1; then
  rm -rf conftest*
  have_threads=posix
fi
rm -f conftest*

        fi
        if test "x$have_threads" = xnone; then
                cat > conftest.$ac_ext <<EOF
#line 4495 "configure"
#include "confdefs.h"
#include <pthread.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "[^a-zA-Z_]pthread_attr_create[^a-zA-Z_]" >/dev/null 2>&1; then
  rm -rf conftest*
  have_threads=dce
fi
rm -f conftest*

        fi
	CPPFLAGS="$glib_save_CPPFLAGS"
fi
if test "x$want_threads" = xyes || test "x$want_threads" = xnspr; then
        if test "x$have_threads" = xnone; then
		echo $ac_n "checking for PRP_NewNakedCondVar in -lnspr21""... $ac_c" 1>&6
echo "configure:4512: checking for PRP_NewNakedCondVar in -lnspr21" >&5
ac_lib_var=`echo nspr21'_'PRP_NewNakedCondVar | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lnspr21  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4520 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char PRP_NewNakedCondVar();

int main() {
PRP_NewNakedCondVar()
; return 0; }
EOF
if { (eval echo configure:4531: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  have_threads=nspr
else
  echo "$ac_t""no" 1>&6
fi

	fi
fi

echo $ac_n "checking for thread implementation""... $ac_c" 1>&6
echo "configure:4555: checking for thread implementation" >&5

if test "x$have_threads" = xnone && test "x$want_threads" != xno; then
	echo "$ac_t""none available" 1>&6
        echo "configure: warning: $THREAD_NO_IMPLEMENTATION" 1>&2
else
	echo "$ac_t""$have_threads" 1>&6
fi



G_THREAD_LIBS=
G_THREAD_CFLAGS=

mutex_has_default=no
case $have_threads in
        posix|dce)
		G_THREAD_LIBS=error
		glib_save_LIBS="$LIBS"
		for thread_lib in "" pthread pthreads c_r thread dce; do
			# This is not AC_CHECK_LIB to also work with function
			# name mangling in header files.
			if test x"$thread_lib" = x; then
				add_thread_lib=""
				IN=""
			else
				add_thread_lib="-l$thread_lib"
				IN=" in -l$thread_lib"
			fi
			
			LIBS="$glib_save_LIBS $add_thread_lib"
			
			echo $ac_n "checking for pthread_create$IN""... $ac_c" 1>&6
echo "configure:4588: checking for pthread_create$IN" >&5
			cat > conftest.$ac_ext <<EOF
#line 4590 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
pthread_create(NULL,NULL,NULL,NULL)
; return 0; }
EOF
if { (eval echo configure:4597: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  echo "$ac_t""yes" 1>&6
				G_THREAD_LIBS="$add_thread_lib"
				break
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  echo "$ac_t""no" 1>&6
fi
rm -f conftest*
		done
		LIBS="$glib_save_LIBS"
                mutex_has_default=yes
                mutex_default_type='pthread_mutex_t'
                mutex_default_init='PTHREAD_MUTEX_INITIALIZER'
                mutex_header_file='pthread.h'
		if test "x$have_threads" = "xposix"; then
			g_threads_impl="POSIX"
		else
			g_threads_impl="DCE"
			have_threads="posix"
		fi
		
                ;;
        solaris)
		G_THREAD_LIBS=error
                echo $ac_n "checking for cond_init in -lthread""... $ac_c" 1>&6
echo "configure:4626: checking for cond_init in -lthread" >&5
ac_lib_var=`echo thread'_'cond_init | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lthread  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4634 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char cond_init();

int main() {
cond_init()
; return 0; }
EOF
if { (eval echo configure:4645: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  G_THREAD_LIBS="-lthread"
else
  echo "$ac_t""no" 1>&6
fi

                mutex_has_default=yes
                mutex_default_type='mutex_t'
		mutex_default_init="DEFAULTMUTEX"
                mutex_header_file='thread.h'
		g_threads_impl="SOLARIS"
                ;;
	nspr)
		echo $ac_n "checking for PRP_NewNakedCondVar in -lnspr21""... $ac_c" 1>&6
echo "configure:4673: checking for PRP_NewNakedCondVar in -lnspr21" >&5
ac_lib_var=`echo nspr21'_'PRP_NewNakedCondVar | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lnspr21  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4681 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char PRP_NewNakedCondVar();

int main() {
PRP_NewNakedCondVar()
; return 0; }
EOF
if { (eval echo configure:4692: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  G_THREAD_LIBS="-lnspr21"
else
  echo "$ac_t""no" 1>&6
fi

		g_threads_impl="NSPR"
		;;
        none)
		g_threads_impl="NONE"
                ;;
        *)
		g_threads_impl="NONE"
		G_THREAD_LIBS=error
                ;;
esac

if test "x$G_THREAD_LIBS" = xerror; then
        { echo "configure: error: $LIBS_NOT_FOUND_1$have_threads$LIBS_NOT_FOUND_2" 1>&2; exit 1; }
fi

case $host in
  *-*-beos*)
    G_THREAD_LIBS="-lbe -lroot -L\$(top_builddir_full)/.libs -lglib "
    ;;
  *)
    ;;
esac


echo $ac_n "checking thread related libraries""... $ac_c" 1>&6
echo "configure:4737: checking thread related libraries" >&5
echo "$ac_t""$G_THREAD_LIBS" 1>&6


if test x"$enable_threads" = xyes; then

    G_THREAD_CFLAGS="$G_THREAD_CFLAGS -D_REENTRANT" # good default guess

    case $host in
	*-aix*)
		G_THREAD_CFLAGS="$G_THREAD_CFLAGS -D_THREAD_SAFE"
		if test x"$GCC" = xyes; then
            	        G_THREAD_CFLAGS="$G_THREAD_CFLAGS -mthreads"
		fi
		;;
	*-freebsd2.2*)
		G_THREAD_CFLAGS="$G_THREAD_CFLAGS -D_THREAD_SAFE"

		# FreeBSD 2.2.x shiped with gcc 2.7.2.x, which doesn't support
		# -mthreads flag.
		;;
    esac

    # if we are not finding the ctime_r function, then we probably are
    # not using the proper multithread flag
    old_CPPFLAGS=$CPPFLAGS
    CPPFLAGS="$CPPFLAGS $G_THREAD_CFLAGS"
    # Note: Digital UNIX 4.0d #defines ctime_r to _Pctime_r for gcc.
    cat > conftest.$ac_ext <<EOF
#line 4766 "configure"
#include "confdefs.h"
#include <time.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "[^a-zA-Z_](_P)?ctime_r[^a-zA-Z_]" >/dev/null 2>&1; then
  :
else
  rm -rf conftest*
  G_THREAD_CFLAGS=
    echo "configure: warning: $FLAG_DOES_NOT_WORK" 1>&2
fi
rm -f conftest*

    CPPFLAGS=$old_CPPFLAGS

    echo $ac_n "checking thread related cflags""... $ac_c" 1>&6
echo "configure:4783: checking thread related cflags" >&5

    echo "$ac_t""$G_THREAD_CFLAGS" 1>&6
else
    G_THREAD_CFLAGS=
fi


if test x"$enable_threads" = xyes; then
	glib_save_LIBS="$LIBS"
	glib_save_CFLAGS="$CFLAGS"
	# we are not doing the following for now, as this might require glib 
	# to always be linked with the thread libs on some platforms. 
	# LIBS="$LIBS $G_THREAD_LIBS"
	CFLAGS="$CFLAGS $G_THREAD_CFLAGS"
	for ac_func in localtime_r rand_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4801: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4806 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:4829: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

	if test "$ac_cv_header_pwd_h" = "yes"; then
		echo $ac_n "checking for getpwuid_r""... $ac_c" 1>&6
echo "configure:4855: checking for getpwuid_r" >&5
	 	if eval "test \"`echo '$''{'ac_cv_func_getpwuid_r'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 4863 "configure"
#include "confdefs.h"
#include <errno.h>
				int main () { char buffer[10000], *pointer; 
				char getpwuid_r (long, void*, void*,
					int, void*);
				errno = 0;
				getpwuid_r (0, &buffer, &buffer, 
					sizeof (buffer), &pointer);
				return errno == ENOSYS;}
EOF
if { (eval echo configure:4874: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_func_getpwuid_r=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_func_getpwuid_r=no
fi
rm -fr conftest*
fi

fi

		if test "$ac_cv_func_getpwuid_r" = yes; then
			echo "$ac_t""yes" 1>&6
			cat >> confdefs.h <<\EOF
#define HAVE_GETPWUID_R 1
EOF

		else
			echo "$ac_t""no" 1>&6
		fi
		if test "$ac_cv_func_getpwuid_r" = "yes"; then
			echo $ac_n "checking whether getpwuid_r is posix like""... $ac_c" 1>&6
echo "configure:4899: checking whether getpwuid_r is posix like" >&5
			# getpwuid_r(0, NULL, NULL, 0) is the signature on
			# solaris, if that is not found, the prog below won't 
			# compile, then the posix signature is assumed as 
			# the default.
			cat > conftest.$ac_ext <<EOF
#line 4905 "configure"
#include "confdefs.h"
#include <pwd.h>
int main() {
getpwuid_r(0, NULL, NULL, 0);
; return 0; }
EOF
if { (eval echo configure:4912: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  echo "$ac_t""no" 1>&6
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  echo "$ac_t""yes" 1>&6
				cat >> confdefs.h <<\EOF
#define HAVE_GETPWUID_R_POSIX 1
EOF

fi
rm -f conftest*
		fi
	fi
	LIBS="$glib_save_LIBS"
	CFLAGS="$glib_save_CFLAGS"

	# now spit out all the warnings.
	if test "$ac_cv_func_getpwuid_r" != "yes"; then
		echo "configure: warning: $FUNC_NO_GETPWUID_R" 1>&2
	fi
	if test "$ac_cv_func_localtime_r" != "yes"; then
		echo "configure: warning: $FUNC_NO_LOCALTIME_R" 1>&2
	fi
fi

cat >> confdefs.h <<EOF
#define G_THREAD_SOURCE "gthread-$have_threads.c"
EOF




CFLAGS="$CFLAGS $G_THREAD_CFLAGS"


        case "$mutex_has_default" in
        "yes")
                echo $ac_n "checking size of $mutex_default_type""... $ac_c" 1>&6
echo "configure:4953: checking size of $mutex_default_type" >&5
if eval "test \"`echo '$''{'glib_cv_sizeof_gmutex'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 4961 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <$mutex_header_file>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof($mutex_default_type));
  exit(0);
}
EOF
if { (eval echo configure:4973: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  glib_cv_sizeof_gmutex=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  glib_cv_sizeof_gmutex=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$glib_cv_sizeof_gmutex" 1>&6
cat >> confdefs.h <<EOF
#define GLIB_SIZEOF_GMUTEX $glib_cv_sizeof_gmutex
EOF


	echo $ac_n "checking byte contents of $mutex_default_type""... $ac_c" 1>&6
echo "configure:4993: checking byte contents of $mutex_default_type" >&5
if eval "test \"`echo '$''{'glib_cv_byte_contents_gmutex'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  glib_cv_byte_contents_gmutex=0
else
  cat > conftest.$ac_ext <<EOF
#line 5001 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <$mutex_header_file>
main()
{
  static $mutex_default_type tv = $mutex_default_init;
  char *p = (char*) &tv;
  int i;
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  for (i = 0; i < $glib_cv_sizeof_gmutex; i++)
    fprintf(f, "%s%d", i?",":"", *(p++));
  fprintf(f, "\n");
  exit(0);
}
EOF
if { (eval echo configure:5018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  glib_cv_byte_contents_gmutex=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  glib_cv_byte_contents_gmutex=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$glib_cv_byte_contents_gmutex" 1>&6
cat >> confdefs.h <<EOF
#define GLIB_BYTE_CONTENTS_GMUTEX $glib_cv_byte_contents_gmutex
EOF


	
                ;;
        *)
                
                ;;
        esac



glib_sysdefso="glibconfig-sysdefs.h"
glib_sysdef_msg=`echo POLLIN:1 POLLOUT:4 POLLPRI:2 POLLERR:8 POLLHUP:16 POLLNVAL:32 | sed 's/:[^ 	]*//g'`
if test "x`(echo '\n') 2>/dev/null`" != 'x\n'; then
  glib_nl='\\n'
else
  glib_nl='\n'
fi
echo $ac_n "checking system definitions for $glib_sysdef_msg""... $ac_c" 1>&6
echo "configure:5054: checking system definitions for $glib_sysdef_msg" >&5
cat >confrun.c <<_______EOF
#include <stdio.h>
#include <sys/types.h>
#include <sys/poll.h>
int main (int c, char **v) {
  FILE *f = fopen ("$glib_sysdefso", "a");
  if (!f) return 1;
_______EOF
for glib_sysdef_input in POLLIN:1 POLLOUT:4 POLLPRI:2 POLLERR:8 POLLHUP:16 POLLNVAL:32 ; do
	glib_sysdef=`echo $glib_sysdef_input | sed 's/^\([^:]*\):.*$/\1/'`
	glib_default=`echo $glib_sysdef_input | sed 's/^[^:]*:\(.*\)$/\1/'`
	echo "#ifdef $glib_sysdef" >>confrun.c
	echo "  fprintf (f, \"#define GLIB_SYSDEF_%s %s%d${glib_nl}\", \"$glib_sysdef\", \"=\", $glib_sysdef);" >>confrun.c
	echo "#else" >>confrun.c
	if test $glib_sysdef != $glib_default; then
		echo "  fprintf (f, \"#define GLIB_SYSDEF_%s %s%d${glib_nl}\", \"$glib_sysdef\", \"=\", $glib_default);" >>confrun.c
	else
		echo "  fprintf (f, \"#define GLIB_SYSDEF_%s${glib_nl}\", \"$glib_sysdef\");" >>confrun.c
	fi
	echo "#endif" >>confrun.c
done
echo "return 0; }" >>confrun.c
if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 5081 "configure"
#include "confdefs.h"
`cat confrun.c`
EOF
if { (eval echo configure:5085: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  echo "$ac_t""done" 1>&6
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  	for glib_sysdef_input in POLLIN:1 POLLOUT:4 POLLPRI:2 POLLERR:8 POLLHUP:16 POLLNVAL:32 ; do
		glib_sysdef=`echo $glib_sysdef_input | sed 's/^\([^:]*\):.*$/\1/'`
		glib_default=`echo $glib_sysdef_input | sed 's/^[^:]*:\(.*\)$/\1/'`
		if test $glib_sysdef != $glib_default; then
			glib_default=" =$glib_default"
		else
			glib_default=
		fi
		echo "#define GLIB_SYSDEF_$glib_sysdef$glib_default" >>$glib_sysdefso
	done
	echo "$ac_t""failed" 1>&6
fi
rm -fr conftest*
fi

rm -f confrun.c






trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
fi

trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15

DEFS=-DHAVE_CONFIG_H

# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}

echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.

ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
  case "\$ac_option" in
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
    echo "$CONFIG_STATUS generated by autoconf version 2.13"
    exit 0 ;;
  -help | --help | --hel | --he | --h)
    echo "\$ac_cs_usage"; exit 0 ;;
  *) echo "\$ac_cs_usage"; exit 1 ;;
  esac
done

ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"

trap 'rm -fr `echo "
glib.spec
Makefile
glib-config
gmodule/gmoduleconf.h
gmodule/Makefile
gthread/Makefile
docs/Makefile
tests/Makefile
 config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF

# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
 s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@GLIB_MAJOR_VERSION@%$GLIB_MAJOR_VERSION%g
s%@GLIB_MINOR_VERSION@%$GLIB_MINOR_VERSION%g
s%@GLIB_VERSION@%$GLIB_VERSION%g
s%@GLIB_INTERFACE_AGE@%$GLIB_INTERFACE_AGE%g
s%@GLIB_BINARY_AGE@%$GLIB_BINARY_AGE%g
s%@LT_RELEASE@%$LT_RELEASE%g
s%@LT_CURRENT@%$LT_CURRENT%g
s%@LT_REVISION@%$LT_REVISION%g
s%@LT_AGE@%$LT_AGE%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@PACKAGE@%$PACKAGE%g
s%@VERSION@%$VERSION%g
s%@ACLOCAL@%$ACLOCAL%g
s%@AUTOCONF@%$AUTOCONF%g
s%@AUTOMAKE@%$AUTOMAKE%g
s%@AUTOHEADER@%$AUTOHEADER%g
s%@MAKEINFO@%$MAKEINFO%g
s%@SET_MAKE@%$SET_MAKE%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@build@%$build%g
s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
s%@RANLIB@%$RANLIB%g
s%@CC@%$CC%g
s%@LD@%$LD%g
s%@NM@%$NM%g
s%@LN_S@%$LN_S%g
s%@LIBTOOL@%$LIBTOOL%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
s%@ENABLE_MEM_CHECK@%$ENABLE_MEM_CHECK%g
s%@ENABLE_MEM_PROFILE@%$ENABLE_MEM_PROFILE%g
s%@CPP@%$CPP%g
s%@G_MODULE_IMPL@%$G_MODULE_IMPL%g
s%@G_MODULE_LIBS@%$G_MODULE_LIBS%g
s%@G_MODULE_PLUGIN_LIBS@%$G_MODULE_PLUGIN_LIBS%g
s%@G_MODULE_LDFLAGS@%$G_MODULE_LDFLAGS%g
s%@G_MODULE_HAVE_DLERROR@%$G_MODULE_HAVE_DLERROR%g
s%@G_MODULE_NEED_USCORE@%$G_MODULE_NEED_USCORE%g
s%@GLIB_DEBUG_FLAGS@%$GLIB_DEBUG_FLAGS%g
s%@GTHREAD_COMPILE_IMPL_DEFINES@%$GTHREAD_COMPILE_IMPL_DEFINES%g
s%@G_THREAD_CFLAGS@%$G_THREAD_CFLAGS%g
s%@G_THREAD_LIBS@%$G_THREAD_LIBS%g

CEOF
EOF

cat >> $CONFIG_STATUS <<\EOF

# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
  if test $ac_beg -gt 1; then
    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
  else
    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
  fi
  if test ! -s conftest.s$ac_file; then
    ac_more_lines=false
    rm -f conftest.s$ac_file
  else
    if test -z "$ac_sed_cmds"; then
      ac_sed_cmds="sed -f conftest.s$ac_file"
    else
      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
    fi
    ac_file=`expr $ac_file + 1`
    ac_beg=$ac_end
    ac_end=`expr $ac_end + $ac_max_sed_cmds`
  fi
done
if test -z "$ac_sed_cmds"; then
  ac_sed_cmds=cat
fi
EOF

cat >> $CONFIG_STATUS <<EOF

CONFIG_FILES=\${CONFIG_FILES-"glib.spec
Makefile
glib-config
gmodule/gmoduleconf.h
gmodule/Makefile
gthread/Makefile
docs/Makefile
tests/Makefile
"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.

  # Remove last slash and all that follows it.  Not all systems have dirname.
  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
    # The file is in a subdirectory.
    test ! -d "$ac_dir" && mkdir "$ac_dir"
    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
    # A "../" for each directory in $ac_dir_suffix.
    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
  else
    ac_dir_suffix= ac_dots=
  fi

  case "$ac_given_srcdir" in
  .)  srcdir=.
      if test -z "$ac_dots"; then top_srcdir=.
      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
  *) # Relative path.
    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
    top_srcdir="$ac_dots$ac_given_srcdir" ;;
  esac

  case "$ac_given_INSTALL" in
  [/$]*) INSTALL="$ac_given_INSTALL" ;;
  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
  esac

  echo creating "$ac_file"
  rm -f "$ac_file"
  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
  case "$ac_file" in
  *Makefile*) ac_comsub="1i\\
# $configure_input" ;;
  *) ac_comsub= ;;
  esac

  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*

# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
ac_dC='\3'
ac_dD='%g'
# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_uB='\([ 	]\)%\1#\2define\3'
ac_uC=' '
ac_uD='\4%g'
# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_eB='$%\1#\2define\3'
ac_eC=' '
ac_eD='%g'

if test "${CONFIG_HEADERS+set}" != set; then
EOF
cat >> $CONFIG_STATUS <<EOF
  CONFIG_HEADERS="config.h"
EOF
cat >> $CONFIG_STATUS <<\EOF
fi
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  echo creating $ac_file

  rm -f conftest.frag conftest.in conftest.out
  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  cat $ac_file_inputs > conftest.in

EOF

# Transform confdefs.h into a sed script conftest.vals that substitutes
# the proper values into config.h.in to produce config.h.  And first:
# Protect against being on the right side of a sed subst in config.status.
# Protect against being in an unquoted here document in config.status.
rm -f conftest.vals
cat > conftest.hdr <<\EOF
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
EOF
sed -n -f conftest.hdr confdefs.h > conftest.vals
rm -f conftest.hdr

# This sed command replaces #undef with comments.  This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >> conftest.vals <<\EOF
s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
EOF

# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.

rm -f conftest.tail
while :
do
  ac_lines=`grep -c . conftest.vals`
  # grep -c gives empty output for an empty file on some AIX systems.
  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
  # Write a limited-size here document to conftest.frag.
  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
  echo 'CEOF
  sed -f conftest.frag conftest.in > conftest.out
  rm -f conftest.in
  mv conftest.out conftest.in
' >> $CONFIG_STATUS
  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
  rm -f conftest.vals
  mv conftest.tail conftest.vals
done
rm -f conftest.vals

cat >> $CONFIG_STATUS <<\EOF
  rm -f conftest.frag conftest.h
  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
  cat conftest.in >> conftest.h
  rm -f conftest.in
  if cmp -s $ac_file conftest.h 2>/dev/null; then
    echo "$ac_file is unchanged"
    rm -f conftest.h
  else
    # Remove last slash and all that follows it.  Not all systems have dirname.
      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
      # The file is in a subdirectory.
      test ! -d "$ac_dir" && mkdir "$ac_dir"
    fi
    rm -f $ac_file
    mv conftest.h $ac_file
  fi
fi; done

EOF
cat >> $CONFIG_STATUS <<EOF



# Note that if two cases are the same, case goes with the first one.
# Note also that this is inside an AC_OUTPUT_COMMAND.  We do not depend
# on variable expansion in case labels.  Look at the generated config.status
# for a hint.

case xyes in
x$ac_cv_header_float_h)
  glib_float_h=yes
  glib_mf=FLT_MIN glib_Mf=FLT_MAX
  glib_md=DBL_MIN glib_Md=DBL_MAX
  ;;
x$ac_cv_header_values_h)
  glib_values_h=yes
  glib_mf=MINFLOAT  glib_Mf=MAXFLOAT
  glib_md=MINDOUBLE glib_Md=MAXDOUBLE
  ;;
esac

case xyes in
x$ac_cv_header_limits_h)
  glib_limits_h=yes
  glib_ms=SHRT_MIN glib_Ms=SHRT_MAX glib_Mus=USHRT_MAX
  glib_mi=INT_MIN  glib_Mi=INT_MAX  glib_Mui=UINT_MAX
  glib_ml=LONG_MIN glib_Ml=LONG_MAX glib_Mul=ULONG_MAX
  ;;
x$ac_cv_header_values_h)
  glib_values_h=yes
  glib_ms=MINSHORT glib_Ms=MAXSHORT glib_Mus="(((gushort)G_MAXSHORT)*2+1)"
  glib_mi=MININT   glib_Mi=MAXINT   glib_Mui="(((guint)G_MAXINT)*2+1)"
  glib_ml=MINLONG  glib_Ml=MAXLONG  glib_Mul="(((gulong)G_MAXLONG)*2+1)"
  ;;
esac

if test x$ac_cv_header_sys_poll_h = xyes ; then
  glib_sys_poll_h=yes
fi

case 2 in
$ac_cv_sizeof_short)		
  gint16=short
  gint16_format='"hi"'
  guint16_format='"hu"'
  ;;
$ac_cv_sizeof_int)		
  gint16=int
  gint16_format='"i"'
  guint16_format='"u"'
  ;;
esac
case 4 in
$ac_cv_sizeof_short)		
  gint32=short
  gint32_format='"hi"'
  guint32_format='"hu"'
  ;;
$ac_cv_sizeof_int)		
  gint32=int
  gint32_format='"i"'
  guint32_format='"u"'
  ;;
$ac_cv_sizeof_long)		
  gint32=long
  gint32_format='"li"'
  guint32_format='"lu"'
  ;;
esac
case 8 in
$ac_cv_sizeof_int)
  gint64=int
  gint64_format='"i"'
  guint64_format='"u"'
  glib_extension=
  glib_warning_guard=
  gint64_constant='(val)'
  ;;
$ac_cv_sizeof_long)
  gint64=long
  gint64_format='"li"'
  guint64_format='"lu"'
  glib_extension=
  glib_warning_guard=
  gint64_constant='(val##L)'
  ;;
$ac_cv_sizeof_long_long)
  gint64='long long'
  gint64_format='"'$glib_cv_long_long_format'i"'
  guint64_format='"'$glib_cv_long_long_format'u"'
  glib_extension='G_GNUC_EXTENSION '
  glib_warning_guard="
#if defined (__GNUC__) && __GNUC__ >= 2 && __GNUC_MINOR__ >= 8
#  define G_GNUC_EXTENSION __extension__
#else
#  define G_GNUC_EXTENSION
#endif

"
  gint64_constant='(G_GNUC_EXTENSION (val##LL))'
  ;;
esac

gintbits=`expr $ac_cv_sizeof_int \* 8`
glongbits=`expr $ac_cv_sizeof_long \* 8`


case $ac_cv_sizeof_void_p in
$ac_cv_sizeof_int)  	glib_gpi_cast=''        glib_gpui_cast=''         ;;
$ac_cv_sizeof_long) 	glib_gpi_cast='(glong)' glib_gpui_cast='(gulong)' ;;
*) 			glib_unknown_void_p=yes ;;
esac


case xyes in
x$ac_cv_func_atexit)
  glib_atexit="
#ifdef NeXT /* @#%@! NeXTStep */
# define g_ATEXIT(proc)	(!atexit (proc))
#else
# define g_ATEXIT(proc)	(atexit (proc))
#endif"
  ;;
x$ac_cv_func_on_exit)
  glib_atexit="
#define g_ATEXIT(proc)	(on_exit ((void (*)(int, void*))(proc), NULL))"
  ;;
esac

case xyes in
x$ac_cv_func_memmove)
  glib_memmove='
#define g_memmove(d,s,n) G_STMT_START { memmove ((d), (s), (n)); } G_STMT_END'
  ;;
*)
  glib_memmove="
/* We make the assumption that if memmove isn't available, then
 * bcopy will do the job. This isn't safe everywhere. (bcopy can't
 * necessarily handle overlapping copies) */
#define g_memmove(d,s,n) G_STMT_START { bcopy ((s), (d), (n)); } G_STMT_END"
  ;;
esac

glib_defines="
#define GLIB_MAJOR_VERSION $GLIB_MAJOR_VERSION
#define GLIB_MINOR_VERSION $GLIB_MINOR_VERSION
#define GLIB_MICRO_VERSION $GLIB_MICRO_VERSION
"

case xyes in
x$glib_cv_va_copy)	glib_vacopy='#define G_VA_COPY	va_copy' ;;
x$glib_cv___va_copy)	glib_vacopy='#define G_VA_COPY	__va_copy' ;;
*)			glib_vacopy=''
esac

if test x$glib_cv_va_val_copy = xno; then
  glib_vacopy="\$glib_vacopy
#define G_VA_COPY_AS_ARRAY 1"
fi

if test x$glib_cv_hasinline = xyes; then
    glib_inline='#define G_HAVE_INLINE 1'
fi
if test x$glib_cv_has__inline = xyes; then
    glib_inline="\$glib_inline
#define G_HAVE___INLINE 1"
fi
if test x$glib_cv_has__inline__ = xyes; then
    glib_inline="\$glib_inline
#define G_HAVE___INLINE__ 1"
fi

case xyes in
x$ac_cv_c_bigendian)
  g_byte_order=G_BIG_ENDIAN
  g_bs_native=BE
  g_bs_alien=LE
  ;;
*)
  g_byte_order=G_LITTLE_ENDIAN
  g_bs_native=LE
  g_bs_alien=BE
  ;;
esac

case x$enable_threads in
xyes)	g_enable_threads_def="#define";;
*)	g_enable_threads_def="#undef ";;
esac

g_threads_impl_def=$g_threads_impl

g_mutex_has_default="$mutex_has_default"
g_mutex_sizeof="$glib_cv_sizeof_gmutex"
g_mutex_contents="$glib_cv_byte_contents_gmutex"

if test "x$glib_native_beos" = "xyes"; then
    glib_native_beos_def="\$glib_native_beos_def
#define GLIB_NATIVE_BEOS 1"
fi           


EOF
cat >> $CONFIG_STATUS <<\EOF
test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h


## Generate `glibconfig.h' in two cases
## 1. `config.status' is run either explicitly, or via configure.
##     Esp. not when it is run in `Makefile' to generate makefiles and
##     config.h
## 2. CONFIG_OTHER is set explicitly
##
## Case 1 is difficult.  We know that `automake' sets one of
## CONFIG_FILES or CONFIG_HEADERS to empty.  This heuristic works
## only when AM_CONFIG_HEADER is set, however.

if test -n "${CONFIG_FILES}" && test -n "${CONFIG_HEADERS}"; then
  # Both CONFIG_FILES and CONFIG_HEADERS are non-empty ==> Case 1
  CONFIG_OTHER=${CONFIG_OTHER:-glibconfig.h}
fi
case "$CONFIG_OTHER" in
*glibconfig.h*)
	echo creating glibconfig.h
	outfile=glibconfig.h-tmp
	cat > $outfile <<\_______EOF
/* glibconfig.h
 *
 * This is a generated file.  Please modify `configure.in'
 */

#ifndef GLIBCONFIG_H
#define GLIBCONFIG_H

#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */

_______EOF

	if test x$glib_limits_h = xyes; then
	  echo '#include <limits.h>' >> $outfile
	fi
	if test x$glib_float_h = xyes; then
	  echo '#include <float.h>' >> $outfile
	fi
	if test x$glib_values_h = xyes; then
	  echo '#include <values.h>' >> $outfile
	fi
	if test x$g_mutex_header_file != x; then
	  echo '#include <'"$g_mutex_header_file"'>' >> $outfile
	fi
	if test x$glib_sys_poll_h = xyes; then
	  echo '#define GLIB_HAVE_SYS_POLL_H' >> $outfile
	fi

	cat >> $outfile <<_______EOF

#define G_MINFLOAT	$glib_mf
#define G_MAXFLOAT	$glib_Mf
#define G_MINDOUBLE	$glib_md
#define G_MAXDOUBLE	$glib_Md
#define G_MINSHORT	$glib_ms
#define G_MAXSHORT	$glib_Ms
#define G_MAXUSHORT	$glib_Mus
#define G_MININT	$glib_mi
#define G_MAXINT	$glib_Mi
#define G_MAXUINT	$glib_Mui
#define G_MINLONG	$glib_ml
#define G_MAXLONG	$glib_Ml
#define G_MAXULONG	$glib_Mul

_______EOF


	### this should always be true in a modern C/C++ compiler
	cat >>$outfile <<_______EOF
typedef signed char gint8;
typedef unsigned char guint8;
_______EOF


	if test -n "$gint16"; then
	  cat >>$outfile <<_______EOF
typedef signed $gint16 gint16;
typedef unsigned $gint16 guint16;
#define G_GINT16_FORMAT $gint16_format
#define G_GUINT16_FORMAT $guint16_format
_______EOF
	fi


	if test -n "$gint32"; then
	  cat >>$outfile <<_______EOF
typedef signed $gint32 gint32;
typedef unsigned $gint32 guint32;
#define G_GINT32_FORMAT $gint32_format
#define G_GUINT32_FORMAT $guint32_format
_______EOF
	fi


	if test -n "$gint64"; then
	  cat >>$outfile <<_______EOF
${glib_warning_guard}#define G_HAVE_GINT64 1

${glib_extension}typedef signed $gint64 gint64;
${glib_extension}typedef unsigned $gint64 guint64;

#define G_GINT64_FORMAT $gint64_format
#define G_GUINT64_FORMAT $guint64_format
#define G_GINT64_CONSTANT(val)	$gint64_constant
_______EOF
	fi


	if test -z "$glib_unknown_void_p"; then
	  cat >>$outfile <<_______EOF

#define GPOINTER_TO_INT(p)	((gint)  ${glib_gpi_cast} (p))
#define GPOINTER_TO_UINT(p)	((guint) ${glib_gpui_cast} (p))

#define GINT_TO_POINTER(i)	((gpointer) ${glib_gpi_cast} (i))
#define GUINT_TO_POINTER(u)	((gpointer) ${glib_gpui_cast} (u))
_______EOF
	else
	  echo '#error SIZEOF_VOID_P unknown - This should never happen' >>$outfile
	fi



	cat >>$outfile <<_______EOF
$glib_atexit
$glib_memmove
$glib_defines

$glib_vacopy

#ifdef	__cplusplus
#define	G_HAVE_INLINE	1
#else	/* !__cplusplus */
$glib_inline
#endif	/* !__cplusplus */
_______EOF

	echo >>$outfile
	if test x$g_mutex_has_default = xyes; then
		cat >>$outfile <<_______EOF
$g_enable_threads_def G_THREADS_ENABLED
#define G_THREADS_IMPL_$g_threads_impl_def
typedef struct _GStaticMutex GStaticMutex;
struct _GStaticMutex
{
  struct _GMutex *runtime_mutex;
  union {
    char   pad[$g_mutex_sizeof];
    double dummy_double;
    void  *dummy_pointer;
    long   dummy_long;
  } aligned_pad_u;
};
#define	G_STATIC_MUTEX_INIT	{ NULL, { { $g_mutex_contents} } }
#define	g_static_mutex_get_mutex(mutex) \
  (g_thread_use_default_impl ? ((GMutex*) &((mutex)->aligned_pad_u)) : \
   g_static_mutex_get_mutex_impl (&((mutex)->runtime_mutex)))
_______EOF
	else
		cat >>$outfile <<_______EOF
$g_enable_threads_def G_THREADS_ENABLED
#define G_THREADS_IMPL_$g_threads_impl_def
typedef struct _GMutex* GStaticMutex;
#define G_STATIC_MUTEX_INIT NULL
#define g_static_mutex_get_mutex(mutex) (g_static_mutex_get_mutex_impl (mutex))
_______EOF
	fi

	echo >>$outfile
	g_bit_sizes="16 32"
	if test -n "$gint64"; then
	  g_bit_sizes="$g_bit_sizes 64"
	fi
	for bits in $g_bit_sizes; do
	  cat >>$outfile <<_______EOF
#define GINT${bits}_TO_${g_bs_native}(val)	((gint${bits}) (val))
#define GUINT${bits}_TO_${g_bs_native}(val)	((guint${bits}) (val))
#define GINT${bits}_TO_${g_bs_alien}(val)	((gint${bits}) GUINT${bits}_SWAP_LE_BE (val))
#define GUINT${bits}_TO_${g_bs_alien}(val)	(GUINT${bits}_SWAP_LE_BE (val))
_______EOF
	done

	cat >>$outfile <<_______EOF
#define GLONG_TO_LE(val)	((glong) GINT${glongbits}_TO_LE (val))
#define GULONG_TO_LE(val)	((gulong) GUINT${glongbits}_TO_LE (val))
#define GLONG_TO_BE(val)	((glong) GINT${glongbits}_TO_BE (val))
#define GULONG_TO_BE(val)	((gulong) GUINT${glongbits}_TO_BE (val))
#define GINT_TO_LE(val)		((gint) GINT${gintbits}_TO_LE (val))
#define GUINT_TO_LE(val)	((guint) GUINT${gintbits}_TO_LE (val))
#define GINT_TO_BE(val)		((gint) GINT${gintbits}_TO_BE (val))
#define GUINT_TO_BE(val)	((guint) GUINT${gintbits}_TO_BE (val))
#define G_BYTE_ORDER $g_byte_order

_______EOF

	if test -r glibconfig-sysdefs.h; then
	  cat glibconfig-sysdefs.h >>$outfile
	fi

	cat >>$outfile <<_______EOF
#ifdef __cplusplus
}
#endif /* __cplusplus */

#endif /* GLIBCONFIG_H */
_______EOF


	if cmp -s $outfile glibconfig.h; then
	  echo glibconfig.h is unchanged
	  rm -f $outfile
	else
	  mv $outfile glibconfig.h
	fi ;;
esac

case "$CONFIG_FILES" in
*glib-config*)chmod +x glib-config;;
esac
echo ""
echo " *** IMPORTANT *** "
echo ""
echo "This is a development version of GLib.  You should be using a stable"
echo "version, which is available at ftp://ftp.gtk.org/pub/gtk/v1.2/.  The"
echo "version you just configured is meant for developers of GLib only:"
echo ""
echo "  * You should not base stable software on this version of GLib."
echo "  * GNOME developers should use a stable version of GLib."
echo ""
echo "Distributions should *NOT* ship a development package of this GLib."
echo "Do not ship the headers and do not ship the glib-config script.  These"
echo "things will conflict with the stable 1.2 series.  Package only enough"
echo "to satisfy the requirements of some other package.  Package only the"
echo "library itself.  Doing otherwise will do no favors to the community."
echo ""
echo "If you install this version of GLib, we strongly recommend that you"
echo "install it in a different prefix than GLib 1.2.  Use --prefix as an"
echo "argument to configure to do this.  Otherwise, you will not be able to"
echo "do development with GLib 1.2 any longer."
echo ""
echo " *** You should be using GLib 1.2 instead. ***"

exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1


